Low Power Consumption: 0.8A (TYP.) Input Voltage Range : 1.5V ~ 6.0V Output Voltage Range : 0.9V ~ 5.0V Maximum Output Current: 200mA (300mA Limit, TYP .) @ VOUT=3.0V, VIN=4.0V Current Limiter Circuit Built-In Ceramic Capacitor Compatible Small Packages : USP-4, USP-3 SSOT-24, SOT-25 APPLICATIONS Mobile phones Cordless phones, wireless communication equipment Portable games Cameras, Video recorders Portable AV equipment PDAs GENERAL DESCRIPTION The XC6215 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves very low supply current, 0.8A (TYP.) and consists of a reference voltage source, an error amplifier, a current foldback circuit, and a phase compensation circuit plus a driver transistor. Ultra small packages USP-3, USP-4, and SSOT-24, and small package SOT-25 packages make high density mounting possible. Therefore, the series is ideal for applications where high density mounting is required such as in mobile phones. Output voltage is selectable in 100mV increments within a range of 0.9V ~ 5.0V by laser trimming The series is also compatible with low ESR ceramic capacitors, which give added output stability. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin. Furthermore, the CE function allows the output of the regulator to be turned off, resulting in greatly reduced power FEATURES Maximum Output Current : 200mA (300mA Limit, TYP.) @ VOUT=3.0V, VIN=4.0V Dropout Voltage : 320mV @ IOUT = 100mA @ VOUT = 3.0V Operating Input Voltage Range: 1.5V ~ 6.0V Output Voltage Range : 0.9V ~ 5.0V (100mV Increments) Highly Accurate : Set voltage accuracy 2% (1.5VTYPICAL APPLICATION CIRCUIT USP-4, SSOT-24, SOT-25 packages (For the USP-3 package, with no CE pin) TYPICAL PERFORMANCE CHARACTERISTICS Supply Current vs. Input Voltage XC6215x302 VIN=VCE CIN=1.0F(ceram ic),CL=0.1F(ceram ic) VIN VOUT VOUT (A) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 6 Input Voltage VIN (V) T a=-40 T a=25 T a=85 CIN=1.0uF (ceramic) CL=0.1uF (ceramic) Supply Current I CE VSS SS XC6215 ETR0319_003 1/31 XC6215 Series PIN CONFIGURATION VSS 3 VOUT 2 VIN 1 3 VSS USP-3 (BOTTOM VIEW) USP-4 (BOTTOM VIEW) VIN 4 VSS 2 VOUT 1 3 CE 4 VIN VOUT 3 1 CE 2 VSS SOT-25 (TOP VIEW) SSOT-24 (TOP VIEW) * For mounting intensity and heat dissipation, please refer to recommended mounting pattern and recommended metal mask when soldering the pad of USP-4. Mounting should be electrically isolated or connected to the VSS (No.2) pin. PIN ASSIGNMENT USP-4 4 2 3 1 PIN NUMBER USP-3 SSOT-24 1 3 2 4 2 1 3 SOT-25 1 2 3 5 4 PIN NAME VIN VSS CE VOUT NC FUNCTION Power Supply Ground ON / Off Switch Output No Connection PRODUCT CLASSIFICATION Ordering Information XC6215 DESIGNATOR DESCRIPTION Type of Regulator Output Voltage Output Voltage Accuracy SYMBOL B P 09 ~ 50 2 G Package N M H Device Orientation R L DESCRIPTION : CE logic = High active with no pull-down resistor : 3 pin regulator with no CE pin (USP-3 only) : 0.9 V ~ 5.0V, 100mV step e.g. VOUT=3.0V =3, =0 : + 2 % accuracy e.g. VOUT=3.0V =3, =0, =2 : USP-4 : SSOT-24 : SOT-25 : USP-3 (for the XC6215P series only) : Embossed tape, standard feed : Embossed tape, reverse feed 2/31 XC6215 Series PACKAGING INFORMATION USP-4 1. 20. 08 . USP-3 1.20 1. 60. 08 MAX0 . 6 +0 . 005 - 0 . 004 MAX 0.6 0. 007 1.20 . 0. 20. 1 0. 30. 05 R0.1 R0.05 0.70 0.05 3 3 0.20 0.30 1.00 0.60 . 0. 70. 1 * Soldering fillet s urface is not form ed becaus e the s ides of the pins are plated. 1. 00. 1 ( 0. 6) SOT-25 2.90.2 0.4 +0.1 -0.05 SSOT-24 . 0.20 2 1 2.0+0.2 3 - 0.25 +0.05 -0.1 5 4 0.050.05 1.25 -0.1 2.1+0.3 2.80.2 1.6 +0.2 +0.2 -0.1 MIN0.2 0 +0.1 -0 1 (0.95) 2 1.90.2 3 0.15 -0.05 +0.1 0.35 1.3+0.2 1.150.15 +0.05 -0.1 0.125 -0.05 - +0.1 1.10.1 0.9+0.1 . +0.2 0.9 -0.1 0.3 -0.2 +0 3/31 XC6215 Series MARKING RULE SSOT-24 4 3 Represents type of regulator and output voltage range MARK TYPE OUTPUT VOLTAGE RANGE T 0.9V ~ 3.0V CE pin, High Active with no pull-down resistor built in U 3.1V ~ 5.0V Represents decimal point of output voltage MARK OUTPUT VOLTAGE (V) 0 3.1 1 3.2 2 3.3 3 3.4 4 3.5 5 3.6 6 3.7 7 3.8 8 0.9 3.9 9 1.0 4.0 A 1.1 4.1 B 1.2 4.2 C 1.3 4.3 D 1.4 4.4 E 1.5 4.5 Represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excepted) NOTE: No character inversion used. PRODUCT SERIES XC6215Bxxxxx 1 2 MARK F H K L M N P R S T U V X Y Z OUTPUT VOLTAGE (V) 1.6 4.6 1.7 4.7 1.8 4.8 1.9 4.9 2.0 5.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 - USP-4, USP-3 Represents product series MARK PRODUCT SERIES E XC6215xxxxxx USP-4 TOP VIEW Represents type of regulator and output voltage range MARK T U TYPE CE pin, High Active with no pull-down resistor built in OUTPUT VOLTAGE RANGE PRODUCT SERIES 0.9V ~ 3.0V XC6215xxxxxx 3.1V ~ 5.0V USP-3 TOP VIEW Represents output voltage MARK OUTPUT VOLTAGE (V) 0 3.1 1 3.2 2 3.3 3 3.4 4 3.5 5 3.6 6 3.7 7 3.8 8 0.9 3.9 9 1.0 4.0 A 1.1 4.1 B 1.2 4.2 C 1.3 4.3 D 1.4 4.4 E 1.5 4.5 Represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excepted) NOTE: No character inversion used. MARK F H K L M N P R S T U V X Y Z OUTPUT VOLTAGE (V) 1.6 4.6 1.7 4.7 1.8 4.8 1.9 4.9 2.0 5.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 - 4/31 XC6215 Series MARKING RULE SOT-25 5 Represents product series 4 MARK E PRODUCT SERIES XC6215xxxxxx Represents type of regulators and output voltage range MARK T U TYPE CE pin, High Active with no pull-down resistor built in OUTPUT VOLTAGE RANGE 0.9V~3.0V 3.1V~5.0V PRODUCT SERIES XC6215xxxxxx 1 2 3 SOT-25 (TOP VIEW) Represents output voltage MARK 0 1 2 3 4 5 6 7 8 9 A B C D E OUTPUT VOLTAGE (V) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 0.9 3.9 1.0 4.0 1.1 4.1 1.2 4.2 1.3 4.3 1.4 4.4 1.5 4.5 MARK F H K L M N P R S T U V X Y Z OUTPUT VOLTAGE (V) 1.6 4.6 1.7 4.7 1.8 4.8 1.9 4.9 2.0 5.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 - Represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excepted) NOTE: No character inversion used. 5/31 XC6215 Series BLOCK DIAGRAMS XC6215B Series XC6215P Series VIN CE ON/OFF Control - Error Amp + VIN Current Limit VOUT each circuit Current Limit R1 R1 R2 Voltage Reference Voltage Reference VSS * Diodes shown in the above circuit are ESD protection diodes and parasitic diodes ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage (*2) SOT-25 Power Dissipation SSOT-24 USP-4 USP-3 Operating Temperature Range Storage Temperature Range Note: *1: IOUT = Pd/ (VIN-VOUT) *2: Except for the XC6215P series SYMBOL VIN IOUT VOUT VCE RATINGS - 0.3 ~ + 7.0 500 (*1) VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ 0.7 250 150 120 120 - 40 ~ + 85 - 55 ~ +125 UNITS V mA V V Pd mW Topr Tstg 6/31 R2 VOUT Error Amp + VSS XC6215 Series ELECTRICAL CHARACTERISTICS XC6215B Series PARAMETER Output Voltage (*2) SYMBOL VOUT(E) CONDITIONS VIN=VCE=VOUT(T) (*1) + 1.0V, IOUT=1mA VIN=VCE=VOUT(T) + 1.0V VOUT(T)=0.9V VIN=VCE=VOUT(T) + 1.0V VOUT(T)=1.0V ~ 1.1V VIN=VCE=VOUT(T) + 1.0V V VOUT(T)=1.2V ~ 1.3V VIN=VCE=VOUT(T) + 1.0V VOUT(T)=1.4V ~ 1.6V VIN=VCE=VOUT(T) + 1.0V VOUT(T)=1.7V ~ 2.2V VIN=VCE=VOUT(T) + 1.0V VOUT(T)=2.3V ~ 2.9V VIN=VCE=VOUT(T) + 1.0V VOUT(T)3.0V VIN=VCE=VOUT(T) + 1.0V VOUT(T)=0.9V 1mAIOUT50mA VIN=VCE=VOUT(T) + 1.0V VOUT(T)= 1.0V ~ 1.1V 1mAIOUT60mA VIN=VCE=VOUT(T) + 1.0V VOUT(T)=1.2V~1.3V 1mAIOUT80mA VIN=VCE=VOUT(T) + 1.0V VOUT(T)1.4V 1mAIOUT100mA VCE=VIN, VOUT(T)=0.9V IOUT=50mA VCE=VIN, VOUT(T)=1.0V ~ 1.1V IOUT=60mA VCE=VIN, VOUT(T)=1.2V ~ 1.3V IOUT=80mA VCE=VIN, VOUT(T)1.4V IOUT=100mA VIN=VCE=VOUT(T) + 1.0V VOUT(T)3.9V VIN=VCE=VOUT(T) + 1.0V VOUT(T)4.0V VIN=VOUT(T) + 1.0V, VCE=VSS MIN. TYP. E-0(*6) 50 60 80 100 120 150 200 70 80 110 140 150 195 300 mA MAX. Ta = 25 UNIT. CIRCUIT V Maximum Output Current IOUTMAX Load Regulation VOUT - 15 70 mV 1 Dropout Voltage (*3) Vdif E-1(*6) mV 1 - 0.8 1.0 0.01 1.5 A 1.8 0.10 A 2 2 Supply Current IDD Stand-by Current Istby 7/31 XC6215 Series ELECTRICAL CHARACTERISTICS (Continued) XC6215B Series (Continued) PARAMETER SYMBOL CONDITIONS VOUT(T)=0.9V, VCE=VIN 1.5VVIN6.0V IOUT=1mA VOUT(T)=1.0V~1.2V, VCE=VIN VOUT(T)+0.5VVIN6.0V IOUT=1mA VOUT(T)1.3V, VCE=VIN VOUT(T)+0.5VVIN6.0V IOUT=30mA VIN=VCE=VOUT(T)+1.0V IOUT=30mA , - 40< Topr < 85 VOUT=VOUT(E)x0.95 VOUT(T)=0.9V VIN=VCE= VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)=1.0V ~ 1.1V VIN=VCE= VOUT(T)+2.0V Current Limit IIim VOUT=VOUT(E)x0.95 VOUT(T)=1.2V ~ 1.3V VIN=VCE= VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)=1.4V ~ 2.9V VIN=VCE= VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)3.0V VIN=VCE= VOUT(T)+1.0V Short Circuit Current CE `H' Level Voltage CE `L' Level Voltage CE `H' Level Current CE `L' Level Current NOTE: *1: VOUT(T): Fixed output voltage *2: VOUT(E) = Effective output voltage (i.e. the output voltage when "VOUT(T) + 1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif = { VIN1 (*4)- MIN. TYP. MAX. Ta = 25 UNIT. CIRCUIT Line Regulation VOUT VIN VOUT - 0.05 0.15 %/V Input Voltage Output Voltage Temperature Characteristics VIN VOUT T VOUT opr 1.5 - 100 6.0 - V ppm / 100 300 - 120 300 - 160 300 - mA 200 300 - 200 300 - Ishort VCEH VCEL ICEH ICEL VIN=VCE=VOUT(T)+1.0V, VOUT=0V VIN=VOUT(T)+1.0V VIN=VOUT(T)+1.0V VIN=VCE=VOUT(T)+1.0V VIN=VOUT(T)+1.0V, VCE=VSS 1.0 - 0.1 - 0.1 50 - 6.0 0.3 0.1 0.1 mA V A VOUT1 (*5) } *4: VIN1 = The input voltage when VOUT1 appears as input voltage is gradually decreased. *5: VOUT1 = A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT { VOUT(T) + 1.0V } is input. *6: Refer to "VOLTAGE CHART". 8/31 XC6215 Series ELECTRICAL CHARACTERISTICS (Continued) XC6215P Series PARAMETER Output Voltage (*2) SYMBOL VOUT(E) CONDITIONS VIN=VOUT(T) (*1) + 1.0V, IOUT=1mA VIN=VOUT(T) + 1.0V VOUT(T)=0.9V VIN=VOUT(T) + 1.0V VOUT(T)=1.0V ~ 1.1V VIN=VOUT(T) + 1.0V VOUT(T)=1.2V ~ 1.3V VIN=VOUT(T) + 1.0V VOUT(T)=1.4V ~ 1.6V VIN=VOUT(T) + 1.0V VOUT(T)=1.7V ~ 2.2V VIN=VOUT(T) + 1.0V VOUT(T)=2.3V ~ 2.9V VIN=VOUT(T) + 1.0V VOUT(T)3.0V VIN=VOUT(T) + 1.0V VOUT(T)=0.9V 1mAIOUT50mA VIN=VOUT(T) + 1.0V VOUT(T)= 1.0V~1.1V 1mAIOUT60mA VIN=VOUT(T) + 1.0V VOUT(T)=1.2V~1.3V 1mAIOUT80mA VIN=VOUT(T) + 1.0V VOUT(T)1.4V 1mAIOUT100mA VOUT(T)=0.9V IOUT=50mA VOUT(T)=1.0V ~ 1.1V IOUT=60mA VOUT(T)=1.2V ~ 1.3V IOUT=80mA VOUT(T)1.4V IOUT=100mA VIN=VOUT(T)=1.0V VOUT(T)3.9V VIN= VOUT(T)+1.0V VOUT(T)4.0V MIN. TYP. E-0 (*6) 50 60 80 100 120 150 200 70 80 110 140 150 195 300 mA MAX. UNIT. V Ta = 25 CIRCUIT Maximum Output Current IOUTMAX Load Regulation VOUT - 15 70 mV 1 Dropout Voltage (*3) Vdif E-1 (*6) mV 1 - 0.8 1.0 1.5 A 1.8 2 Supply Current IDD 9/31 XC6215 Series ELECTRICAL CHARACTERISTICS (Continued) XC6215P Series (Continued) PARAMETER SYMBOL CONDITIONS VOUT(T)=0.9V 1.5VVIN6.0V IOUT=1mA VOUT(T)=1.0V~1.2V VOUT(T)+0.5VVIN6.0V IOUT=1mA VOUT(T)1.3V VOUT(T)+0.5VVIN6.0V IOUT=30mA VIN=VOUT(T)+1.0V, IOUT= 30mA - 40< Topr < 85 VOUT=VOUT(E)x0.95 VOUT(T)=0.9V VIN= VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)=1.0V ~ 1.1V VIN=VOUT(T)+2.0V Current Limit IIim VOUT=VOUT(E)x0.95 VOUT(T)=1.2V ~ 1.3V VIN=VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)=1.4V ~ 2.9V VIN=VOUT(T)+2.0V VOUT=VOUT(E)x0.95 VOUT(T)3.0V VIN=VOUT(T)+1.0V Short Circuit Current NOTE: *1: VOUT(T): Fixed output voltage *2: VOUT(E) = Effective output voltage (i.e. the output voltage when "VOUT(T) + 1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif = { VIN1 (*4) MIN. TYP. MAX. Ta = 25 UNIT. CIRCUIT Line Regulation VOUT VIN VOUT - 0.05 0.15 %/V Input Voltage Output Voltage Temperature Characteristics VIN VOUT Topr VOUT 1.5 - 100 6.0 - V ppm / 100 300 - 120 300 - 160 300 - mA 200 300 - 200 - 300 50 mA Ishort VIN=VOUT(T)+1.0V, VOUT=0V - VOUT1 (*5) } *4: VIN1 = The input voltage when VOUT1 appears as input voltage is gradually decreased. *5: VOUT1 = A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT { VOUT(T) + 1.0V } is input. *6: Refer to "VOLTAGE CHART". 10/31 XC6215 Series VOLTAGE CHART Dropout Voltage Chart SETTING OUTPUT VOLTAGE VOUT(T) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 E-0 OUTPUT VOLTAGE (V) VOUT MIN. 0.870 0.970 1.070 1.170 1.270 1.370 1.470 1.568 1.666 1.764 1.862 1.960 2.058 2.156 2.254 2.352 2.450 2.548 2.646 2.744 2.842 2.940 3.038 3.136 3.234 3.332 3.430 3.528 3.626 3.724 3.822 3.920 4.018 4.116 4.214 4.312 4.410 4.508 4.606 4.704 4.802 4.900 MAX. 0.930 1.030 1.130 1.230 1.330 1.430 1.530 1.632 1.734 1.836 1.938 2.040 2.142 2.244 2.346 2.448 2.550 2.652 2.754 2.856 2.958 3.060 3.162 3.264 3.366 3.468 3.570 3.672 3.774 3.876 3.978 4.080 4.182 4.284 4.386 4.488 4.590 4.692 4.794 4.896 4.998 5.100 Ta = 25 E-1 DROPOUT VOLTAGE (mV) Vdif TYP. 870 860 780 800 720 750 700 680 650 630 610 580 580 580 510 510 450 450 450 450 450 320 320 320 320 320 320 320 320 320 320 290 290 290 290 290 290 290 290 290 290 230 MAX. 1000 1000 950 1000 900 960 890 860 830 800 780 740 740 740 650 650 580 580 580 580 580 420 420 420 420 420 420 420 420 420 420 380 380 380 380 380 380 380 380 380 380 310 11/31 XC6215 Series TEST CIRCUITS Circuit VIN CIN=1.0uF (ceramic) VOUT CL=0.1uF (ceramic) A IOUT Ishort V V CE VSS V RL Circuit A A VIN VOUT OPEN CE CIN=1.0uF (ceramic) VSS 12/31 XC6215 Series OPERATIONAL EXPLANATION XC6215B Series (As for the XC6215P Series, with no CE pin) |